ÑÇÉ«Ó°¿â

Note: you will need to have internet access or be connected to the iconnect SSID to provision your device for User Certificate Setup.

The open iconnect SSID may not be broadcast at all times or in all locations.

1. Open a browser and navigate to .
2. Check the box to agree to the terms and conditions and click Start.
3. Select Laptop or Desktop.
4. Select ÑÇÉ«Ó°¿â Wireless Setup.
5. Enter your ÑÇÉ«Ó°¿â network username in the format of username@iupmsd.iup.edu and your network password.
6. Your device's operating system should automatically be detected.
7. If not, select the appropriate operating system.
8. Click Download.
9. Navigate to the location where your downloads are saved.
10. Run NetworkWizardLoader.exe.
11. The wizard will configure your device for EAP-TLS.
    • Note: if you've previously configured your device with iconnect you may be prompted to select a certificate when connecting to the ÑÇÉ«Ó°¿â wireless network. Select the certificate username@iupmsd.iup.edu and click Connect.
12. When complete, you should get a message saying "successfully connected" and receive a 144.80.X.X IP address.

1. Connect to the ÑÇÉ«Ó°¿â SSID.
2. You will be prompted to enter your username and password or connect using a certificate.
   • Note that if you previously configured the ÑÇÉ«Ó°¿â wireless network using iconnect (link to iconnect setup) on this device, you will have the option to connect using a certificate. Click Connect Using a Certificate and, if prompted, select the username@iupmsd.iup.edu certificate.
   • If you don't have the option to connect using a certificate, then enter your ÑÇÉ«Ó°¿âMSD username in the format of username@iupmsd.iup.edu and your password.
3. After you enter your credentials or select a certificate, a Windows security alert will appear.
   • Click Show Certificate Details.
   • The "Issued to" should contain rs01.iup.edu, rs02.iup.edu, or rs03.iup.edu. The "Server thumbprint" should be e0 cb 22 a9 96 3a d5 b6 b5 0e 92 dc 78 de b5 b8 23 1b e5 88.
   • If they don't match, do not connect to this network as it may not be secure.
   • If these values match, click Connect.
4. Click Connect.
5. You should now be connected to the ÑÇÉ«Ó°¿â wireless network.

Please note that sometimes a Windows device will not prompt you for your username and password. In this case, the ÑÇÉ«Ó°¿â wireless network will need to be set up manually. You should first try using iconnect (see the entry above) to configure your windows device. If that fails, contact the IT Support Center or configure the device manually using the instructions below.

1. Open Control Panel.
2. Click Network and Sharing Center.
3. Click Manager Wireless Networks.
4. Click Manually Create a network profile.
5. Select Manually connect to a wireless network and click Next.
6. Enter ÑÇÉ«Ó°¿â for the network name.
   • Note: This is case sensitive and should be in all capital letters.
7. Select WPA2-Enterprise for the security type.
8. Select AES for the encryption type.
9. Make sure Start This Connection Automatically is checked, and click Next.
10. Click Change Connection Settings.
11. Click the Security tab.
12. Click the Settings button.
13. Check Verify the server's identity by validating the certificate.
14. Check Connect to these servers.
15. Enter rs01.iup.edu;rs02.iup.edu;rs03.iup.edu in the text box.
16. In the Trusted Root Certificate Authorities list double click AAA Certificate Services.
    1. Note: If you do not have AAA Certificate Services listed proceed to step 19
17. Select the Details tab
18. Scroll down to the Thumbprint and verify it is e0 cb 22 a9 96 3a d5 b6 b5 0e 92 dc 78 de b5 b8 23 1b e5 88.
    • Note: if it matches, click OK and check the box next to AAA Certificate Services. If it does not match, proceed to step 19
19. Set Notifications before connecting to Tell user if the server's identity can't be verified.
20. Make sure Authentication Method is set to Secured Password (EAP-MSCHAP v2).
21. Click the Configure button.
22. Uncheck the box next to Automatically Use My Windows Logon Name and Password (and domain if any). Click OK.
23. Click OK.
24. Click Advanced Settings.
25. Check Specify Authentication Mode and select User Authentication.
26. Click Save Credentials and enter your ÑÇÉ«Ó°¿âMSD username in the format of username@iupmsd.iup.edu and your password. Click OK.
27. Click OK, click OK, and click Close.
28. You may have to disable/enable your wireless network adapter or reboot to connect.
29. If you did not check the box next to AAA Certificate Services in step 16, you may be prompted to Continue Connecting.
    1. Click Show certificate details
    2. The Issued To should contain rs01.iup.edu, rs02.iup.edu or rs03.iup.edu, and the Server thumbprint should be e0 cb 22 a9 96 3a d5 b6 b5 0e 92 dc 78 de b5 b8 23 1b e5 88.
    3. If these values match, click Connect. If they don't match do not connect to this network as it may not be secure.
30. You should now be connected to the ÑÇÉ«Ó°¿â wireless network.

Note: you will need to have internet access or be connected to the iconnect SSID to provision your device for User Certificate Setup.

The open iconnect SSID may not be broadcasted at all times or in all locations.

1. If you are connected to the ÑÇÉ«Ó°¿â wireless network, open a browser and navigate to .
2. Check the box to agree to the terms and conditions and click Start.
3. Select Laptop or Desktop.
4. Select ÑÇÉ«Ó°¿â Wireless Setup.
5. Enter your ÑÇÉ«Ó°¿âMSD username in the format of username@iupmsd.iup.edu and your password and click Continue.
6. Your device's operating system should automatically be detected.
7. If not, select the appropriate operating system.
8. Click Download.
9. Navigate to the location where your downloads are saved.
10. Open Cloudpath.zip.
11. Run the Cloudpath application and click Open.
12. Enter your Mac system password three times.
13. The wizard will configure your device for EAP-TLS.
14. You should get a message saying "Successfully Connected" and receive a 144.80.x.x IP address.
15. You should now be connected to the ÑÇÉ«Ó°¿â wireless network.

1. Open System Preferences.
2. Select Network, select Wi-Fi, and click Advanced.
3. Click the "+" under the Preferred Networks list.
4. Enter ÑÇÉ«Ó°¿â as the network name.
   • Note: This is case sensitive and should be in all capital letters.
5. Select WPA2 Enterprise for Security.
6. Enter your ÑÇÉ«Ó°¿âMSD username in the format of username@iupmsd.iup.edu and your password for the Username and Password and click OK.
7. Click OK, click Apply.
8. You should now be connected to the ÑÇÉ«Ó°¿â wireless network.

Please note that you must first have an active internet connection (cellular) in order to automatically configure ÑÇÉ«Ó°¿â wireless on your device.

The iconnect wireless network is available in select locations for your convenience during the start of each semester and can be used to enroll your device.

1. Launch an internet browser and navigate to iconnect.iup.edu
2. Tap the checkbox to agree to the Terms and Conditions, then press Start
3. Tap Mobile Device
4. Enter your ÑÇÉ«Ó°¿â Network Username and password, tap Continue
   
5. A message will appear that this website is trying to download a configuration profile. Tap Allow.
6. A box titled Profile Downloaded will appear. Tap Close.
7. Open the Settings app.
8. At the top of the Settings app tap Profile Downloaded
9. Tap Install in the top right and enter your passcode.
10. Tap Install again in the top right corner. Tap Install at the bottom of the screen.
11. Tap Done in the top right. 
12. Your device should now automatically attempt to connect to the ÑÇÉ«Ó°¿â network. 

You have now set up the ÑÇÉ«Ó°¿â network on your mobile device.

• To set up your iOS device manually on the network, navigate to the Settings app and tap on Wi-Fi.
• Select Other from the list of networks that pop up on your screen.
• Enter ÑÇÉ«Ó°¿â in the name field, then select WPA2 Enterprise in the security option.
• Enter your ÑÇÉ«Ó°¿â network username in the format of username@iupmsd.iup.edu and your password and press Join.
• Tap Trust in the upper right corner.
• You have now connected your device to the ÑÇÉ«Ó°¿â network.

Any field not discussed below should be left blank.

1. Select the Wi-Fi icon at the bottom right of your screen.
2. Choose the ÑÇÉ«Ó°¿â network option.
3. Select PEAP for the EAP method.
4. Select MSCHAPV2 for the Phase 2 Authentication.
5. Select Default under CA Certificate.
6. Enter rs01.iup.edu;rs02.iup.edu;rs03.iup.edu in Domain Suffix Match.
7. Enter your username as username@iupmsd.iup.edu for the Identity box. 
8. Enter your username as username@iupmsd.iup.edu for the Anonymous Identity box. 
9. Enter your ÑÇÉ«Ó°¿â network password for the Password box. 

Please note that you must first have an active internet connection (cellular) in order to automatically configure ÑÇÉ«Ó°¿â wireless on your iOS or Android (Samsung, Google, Motorola, etc.) device.

Note: Devices running Android 13 and above are unable to use this method. Please try the Manual Setup instructions below. 

The iconnect wireless network is available in select locations for your convenience during the start of each semester and can be used to enroll your device.

1. Launch an internet browser and navigate to iconnect.iup.edu
2. Tap the checkbox to agree to the Terms and Conditions, then press Start
3. Tap Mobile Device
4. Enter your ÑÇÉ«Ó°¿â Network Username and password, tap Continue
5. Tap Allow
6. Click Install the Network
7. Select the Play Store you want to go through and click Install
8. Once the Cloudpath app is installed, navigate back to your browser and click Install The Network again
9. Click Next in the Cloudpath app
10. Click Allow
11. Click Done

You have now set up the ÑÇÉ«Ó°¿â network on your mobile device.

Please note that due to differences in Android versions, these instructions may not be comprehensive for your device. However, we believe that these instructions will work on most new Android devices. 

• To connect your Android device to the ÑÇÉ«Ó°¿â network, open your Settings app and tap on Network.
• Select Wi-Fi on the screen.
• Select the ÑÇÉ«Ó°¿â wifi option that pops up on your screen.
• For the EAP option, it should be PEAP.
• Phase 2 Authentication should be MSCHAPV2.
• Certificate should be Use Systems Certificates.
• Minimum TLS version should be TLS v1.0.
• Online Certificate Status (if available) should be Request Certificate Status.
• Domain should be rs01.iup.edu;rs02.iup.edu;rs03.iup.edu.
• In the Identity box, enter your ÑÇÉ«Ó°¿â network username in the format of username@iupmsd.iup.edu
• In the Anonymous identity box, enter your ÑÇÉ«Ó°¿â network username in the format of username@iupmsd.iup.edu
• Enter your network password in the Password box. 
• Press Connect.
• You have now connected your device to the ÑÇÉ«Ó°¿â network.

If you are unable to connect your device to the ÑÇÉ«Ó°¿â wireless network, please visit our office in Delaney Hall for assistance.